2006-2011 Camry Aurion · Service Manual BRAKE

INSTALLATION

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. INSTALL FRONT SPEED SENSOR

  1. C144142
    Install the front speed sensor to the steering knuckle with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    NOTICE:
    Prevent foreign matter from attaching to the front speed sensor tip.

  1. C132781E03
    Install the front speed sensor with the 2 bolts and engage the 2 claws.

    Torque:
    Bolt A:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }
    Bolt B:
    19 N*m{ 194 kgf*cm , 14 ft.*lbf }

    NOTICE:
    1. Do not twist the wire harness for the front speed sensor when installing the front speed sensor.
    2. The bolt B tightens the brake flexible hose and front speed sensor together. Make sure that the flexible hose is positioned over the front speed sensor.
    3. Install the stopper firmly to the hole in the body.

  1. C143910E04
    Connect the front speed sensor connector and clamp.


2. INSTALL FRONT FENDER LINER (w/o Front Fender Mudguard)

HINT:
  1. for 2AZ-FE (Click here).
  2. for 2GR-FE (Click here).


3. INSTALL FRONT FENDER LINER (w/ Front Fender Mudguard)

HINT:
  1. for 2AZ-FE (Click here).
  2. for 2GR-FE (Click here).


4. INSTALL FRONT FENDER MUDGUARD SUB-ASSEMBLY (w/ Front Fender Mudguard)

HINT:
  1. for 2AZ-FE (Click here).
  2. for 2GR-FE (Click here).


5. INSTALL FRONT WHEEL

Torque:
103 N*m{ 1,050 kgf*cm , 76 ft.*lbf }


6. CHECK SPEED SENSOR SIGNAL

HINT:
  1. without VSC (Click here)
  2. with VSC (Click here)

← INSTALLATION (Oct 2006 – May 2009)COMPONENTS (from Jun 2006) →