2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

B2450 Initialization has not been Performed

Diagnostic trouble codes · Vehicles built from Jun 2009

DESCRIPTION

The AFS ECU stores this DTC if initialization has not been performed after the ECU was replaced.
DTC No.
DTC Detection Condition
Trouble Area
B2450
Initialization of the AFS ECU has not been performed
AFS ECU

INSPECTION PROCEDURE


1. PERFORM INITIALIZATION
  1. Perform initialization of the AFS ECU (Click here).


NEXT


2. RECHECK FOR DTC
  1. Using the intelligent tester, recheck for DTCs.

    Result:
    Result
    Proceed to
    DTC B2450 is not output.
    A
    DTC B2450 is output.
    B

    HINT:
    If the AFS ECU stores DTC B2450 even though the ECU has been initialized, there may be a malfunction in the AFS ECU.



B
REPLACE AFS ECU
A

END


← B2427 CAN Communication Malfunction (from Oct 2006)B2452 Height Control Sensor Data Out of Range When Initializing (from Jun 2009) →