B2452 Height Control Sensor Data Out of Range When Initializing
Diagnostic trouble codes · Vehicles built from Jun 2009
DESCRIPTION
The AFS ECU stores this DTC if the sensor value received from the height control sensor is out of range when performing initialization of the AFS ECU; for example, the vehicle is not level or being jacked up.| DTC No. |
DTC Detecting Condition |
Trouble Area |
| B2452 |
Vehicle condition not specified when initializing |
|
INSPECTION PROCEDURE
| 1. PERFORM INITIALIZATION |
Perform initialization of the AFS ECU (Click here).
- HINT:
- Before initializing, make sure that the vehicle condition is proper for initialization.
- Be sure to perform the initialization as instructed.
- Before initializing, make sure that the vehicle condition is proper for initialization.
| NEXT | |
| 2. RECHECK FOR DTC |
Using the intelligent tester, recheck for DTCs.
- Result:
Result
Proceed to
DTC B2452 is not output.
A
DTC B2452 is output.
B
- HINT:
- If the AFS ECU stores DTC B2452 even though the ECU has been initialized as instructed, there may be a malfunction in the AFS ECU.
|
|
||||
| A | ||
| ||
