2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

Radio Receiver Power Source Circuit

Circuit diagnosis · Vehicles built from Oct 2006

Versions by build date: Jun 2006 – Sep 2006 from Oct 2006

DESCRIPTION

This circuit provides power to the radio receiver.

WIRING DIAGRAM

E121223E21

INSPECTION PROCEDURE


1. INSPECT RADIO RECEIVER

  1. E136203E03
    Disconnect the radio receiver connector.

  1. Measure the resistance according to the value in the table below.

    Standard resistance:
    Tester connection
    Condition
    Specified condition
    F6-7 (GND) - Body ground
    Always
    Below 1 Ω

  1. Measure the voltage according to the values in the table below.

    Standard voltage:
    Tester connection
    Condition
    Specified condition
    F6-4 (B) - F6-7 (GND)
    Always
    10 to 14 V
    F6-3 (ACC) - F6-7 (GND)
    Ignition switch on (ACC)
    10 to 14 V



NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE


← Radio Receiver Power Source Circuit (Jun 2006 – Sep 2006)Stereo Component Amplifier Power Source Circuit (from Jun 2009) →