The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted
Circuit diagnosis · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
INSPECTION PROCEDURE
| 1. CHECK CELLULAR PHONE |
 |
Check if the voice on the other side can be heard using a cellular phone.
- OK:
- Voice can be heard.
|
NG |
 |
|
| REPAIR OR REPLACE CELLULAR PHONE |
|
|
| OK |
|
 |
|
| 2. CHECK NAVIGATION SYSTEM |
 |
Check that navigation sound can be heard from the driver side speaker.
- OK:
- Navigation sound can be heard.
|
NG |
 |
|
| GO TO "VOICE GUIDANCE DOES NOT FUNCTION" IN PROBLEM SYMPTOMS TABLE |
|
|
| OK |
|
 |
|
| 3. CHECK SETTINGS |
 |
- Check if the volume level is not set to low on the "Call" screen.
- OK:
- The level is not set to low.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 4. CHECK SETTINGS |
 |
- Enter the "Handsfree Voice Quality Set" mode (Click here).
Check if the Receive Voice Level is set to "0".
- HINT:
- The Receive Voice Level can be set to 11 different levels, -5 to +5, with a 3 dB difference.
Check if the Receive Voice Level is set to the minimum or maximum level.
- HINT:
- When the Receive Voice Level is set to the minimum or maximum level, the sound may be distorted.
- NOTICE:
- "Voice Quality Type" should not be changed.
- OK:
- The Receive Voice Level is set to "0".
|
NG |
 |
|
| SET RECEIVE VOICE LEVEL TO "0" |
|
|
| OK |
|
 |
|
| PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE |
|