2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted

Circuit diagnosis · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

INSPECTION PROCEDURE


1. CHECK CELLULAR PHONE
  1. Check if the voice on the other side can be heard using a cellular phone.

    OK:
    Voice can be heard.



NG
REPAIR OR REPLACE CELLULAR PHONE
OK


2. CHECK NAVIGATION SYSTEM
  1. Check that navigation sound can be heard from the front speaker.

    OK:
    Navigation sound can be heard.



NG
GO TO "VOICE GUIDANCE DOES NOT FUNCTION" IN PROBLEM SYMPTOMS TABLE (Click here)
OK


3. CHECK SETTINGS
  1. Enter the "Call" screen.

  1. E190577E02
    Check if the volume level is not set to low.

    OK:
    The level is not set to low.



NG
SET VOLUME TO HIGH
OK


4. CHECK SETTINGS (OPERATION CHECK)

  1. E176560
    Enter the "Hands-free Volume Setting" screen (Check Hands-free Volume Setting) (Click here).

  1. Check if the "Receive Voice Level" is set to "0".

    HINT:
    The "Receive Voice Level" can be set to 11 different levels, -5 to +5, with a 3 dB difference.

  1. Check if the "Receive Voice Level" is set to the minimum or maximum level.

    HINT:
    When the "Receive Voice Level" is set to the minimum or maximum level, the sound may be distorted.

    OK:
    The "Receive Voice Level" is set to "0".



NG
SET RECEIVE VOICE LEVEL TO "0"
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted (Oct 2006 – May 2009)The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted (Jun 2006 – Sep 2006) →