2006-2011 Camry Aurion · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Jun 2006


1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

2. REMOVE SPARE WHEEL COVER CLAMP

3. REMOVE SPARE WHEEL COVER ASSEMBLY

4. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

  1. B136879
    Remove the 2 screws and the 2 No. 1 luggage compartment trim hooks.


5. REMOVE REAR FLOOR FINISH PLATE

  1. B136852
    Disengage the 7 clips and remove the rear floor finish plate.


6. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH

  1. B149050
    Remove the 2 clips and the luggage compartment inner trim cover LH.


7. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH

  1. B136855
    Remove the 2 clips and the luggage compartment inner trim cover RH.


8. REMOVE LUGGAGE DOOR HINGE TORSION BAR RH

  1. B149076
    Disconnect the luggage door hinge torsion bar RH from the luggage compartment door torsion bar support as shown in the illustration.

  1. B136813
    Using SST, disconnect the luggage door hinge torsion bar RH from the luggage door hinge and the right side of the vehicle body as shown in the illustration.
    SST
    09804-24010  

  1. B136817
    Remove the luggage door hinge torsion bar RH from the left side of the vehicle body as shown in the illustration.


9. REMOVE LUGGAGE DOOR HINGE TORSION BAR LH

  1. B149078
    Disconnect the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support as shown in the illustration.

  1. B136811
    Using SST, disconnect the luggage door hinge torsion bar LH from the luggage door hinge and the left side of the vehicle body as shown in the illustration.
    SST
    09804-24010  

  1. B136815
    Remove the luggage door hinge torsion bar LH from the right side of the vehicle body as shown in the illustration.


10. REMOVE LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT

  1. B149081
    Remove the luggage compartment door torsion bar support as shown in the illustration.

← COMPONENTS (from Jun 2006)INSTALLATION (from Jun 2006) →