2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built Jun 2006 – Sep 2006


INSPECT GLOVE BOX LIGHT ASSEMBLY

  1. I044128
    Apply battery voltage to the glove box light assembly connector.

  1. Check that the glove box light comes on.

    OK:
    Measurement Condition
    Switch Condition
    Specified Condition
    Battery positive (+) → Terminal 2
    Battery negative (-) → Terminal 1
    Glove box light switch ON
    Glove box light comes on

    If the result is not as specified, replace the bulb or glove box light assembly.

← REMOVAL (Jun 2006 – Sep 2006)INSTALLATION (Jun 2006 – Sep 2006) →