REMOVAL
Removal / installation · Vehicles built Jun 2006 – Sep 2006
| 1. REMOVE FRONT DOOR SCUFF PLATE RH |
- HINT:
- Use the same procedure for the RH side and the LH side.
| 2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH |
- HINT:
- Use the same procedure for the RH side and the LH side.
| 3. REMOVE INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY |
Disengage the 4 claws.

Disengage the 2 guides and remove the No. 2 under cover sub-assembly.
| 4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY |
Remove the bolt <A>.
Remove the 4 screws <B>.

Disengage the 3 claws and 3 clips, and then remove the lower instrument panel sub-assembly.
| 5. REMOVE GLOVE BOX LIGHT ASSEMBLY |
Disconnect the connector.

Disengage the 2 claws and remove the glove box light assembly.
