2006-2011 Camry Aurion · Service Manual ENGINE

REASSEMBLY

Removal / installation · Vehicles built from Oct 2006


1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

  1. A133534E01
    Apply a light coat of spindle oil or gasoline to a new O-ring, and install it to the fuel pressure regulator.

  1. A065037
    Push in the fuel pressure regulator to the fuel filter.


2. INSTALL FUEL PUMP

  1. A079496E01
    Apply a light coat of gasoline or grease to the O-ring of the fuel pump.

  1. Push in the fuel pump to the fuel filter.


3. INSTALL FUEL PUMP HARNESS

  1. A079495E05
    Connect the connector (*1).

  1. Install the fuel pump harness (*2).


4. INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY

  1. A129485E02
    Connect the fuel pump connector (*1).

  1. Install the fuel suction plate.


5. INSTALL FUEL SENDER GAUGE ASSEMBLY

  1. A136741E01
    Slide the fuel sender gauge to engage with the claw (*1).

  1. Connect the fuel sender gauge connector (*2).


6. INSTALL FUEL PUMP CUSHION RUBBER

  1. A079492E01
    Install the fuel pump cushion rubber to the fuel pump.


7. INSTALL NO. 2 FUEL SUCTION SUPPORT

  1. A129487
    Install the No. 2 fuel suction support.

← INSPECTION (from Oct 2006)INSTALLATION (from Oct 2006) →