REMOVAL
Removal / installation · Vehicles built from Oct 2006
| 1.
REMOVE EXHAUST TAIL PIPE ASSEMBLY |
 |
Remove the 4 nuts and 2 exhaust tail pipes.


Remove the 2 gaskets from the exhaust tail pipes.
| 2.
REMOVE CENTER EXHAUST PIPE ASSEMBLY |
 |
Remove the 2 bolts, 2 nuts and exhaust center pipe assembly.


Remove the gasket from the exhaust front pipe assembly.
| 3.
REMOVE FRONT EXHAUST PIPE NO. 1 SUPPORT BRACKET |
 |
- Remove the 2 nuts and front support brackets.
| 4.
REMOVE EXHAUST FRONT PIPE ASSEMBLY |
 |
Disconnect the 2 heated oxygen sensor (bank 1, 2 sensor 2) connectors.
Remove the 2 nuts from the exhaust front pipe (left bank exhaust manifold side).


Remove the 2 bolts from the exhaust front pipe (right bank exhaust pipe manifold side).
Remove the exhaust front pipe.
Remove the 2 gaskets from the exhaust front pipe.
| 5.
REMOVE HEATED OXYGEN SENSOR (for Bank 1)
|
 |
- Using SST, remove the oxygen sensor.
- SST
- 09224-00010
| 6.
REMOVE HEATED OXYGEN SENSOR (for Bank 2)
|
 |
- Using SST, remove the oxygen sensor.
- SST
- 09224-00010
| 7.
REMOVE REAR EXHAUST PIPE NO. 1 SUPPORT BRACKET |
 |
- Remove the 2 bolts and rear support bracket.