2006-2011 Camry Aurion · Service Manual HEATER & AIR CONDITIONING SYSTEM

DISASSEMBLY

Removal / installation · Vehicles built from Oct 2006


1. REMOVE MAGNETIC CLUTCH ASSEMBLY

  1. E075074
    Place the compressor and magnetic clutch in a vise.

  1. Using locking pliers, hold the magnetic clutch hub.

  1. Remove the bolt, magnetic clutch hub, and magnetic clutch washers.

    HINT:
    There is no set number of magnetic clutch washers because they are used for adjustment.

  1. E037091
    Using a snap ring expander, remove the snap ring and then remove the magnetic clutch rotor.

    NOTICE:
    1. Take care not to damage the seal cover of the bearing when removing the snap ring.
    2. Do not expand the snap ring by more than 35.5 mm (1.39 in.) when removing it. If it is over-expanded, replace it with a new one.

  1. Disconnect the connector.

  1. Remove the screw.

  1. I030400
    Using a snap ring expander, remove the snap ring and magnetic clutch stator.

← REMOVAL (from Jun 2009)INSPECTION (from Oct 2006) →