INSPECTION
Inspection · Vehicles built from Oct 2006
| INSPECT ENTRY LOCK SWITCH |
 |
- Measure the resistance according to the value(s) in the table below.
- Standard resistance:
- for Front LH Side:
Tester Connection (Symbols)
|
Condition
|
Specified Condition
|
X1-1 (TRG-) - X1-3 (TRG+)
|
Lock switch not pushed
|
10 kΩ or higher
|
Lock switch pushed
|
Below 1 Ω
|
- for Front RH Side:
Tester Connection (Symbols)
|
Condition
|
Specified Condition
|
W1-1 (TRG-) - W1-3 (TRG+)
|
Lock switch not pushed
|
10 kΩ or higher
|
Lock switch pushed
|
Below 1 Ω
|
If the result is not specified, replace the entry lock switch.