2006-2011 Camry Aurion · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY

  1. B149066
    Install the outer rear view mirror assembly with the 3 nuts.

    Torque:
    4.5 N*m{ 46 kgf*cm , 40 in.*lbf }

  1. Connect the connector.


2. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY (for 2GR-FE)
  1. Install the bulb holder.

  1. E147644
    Using a "TORX" driver (T20), install the side turn signal light assembly with the 3 "TORX" screws.


3. INSTALL OUTER MIRROR COVER (for 2GR-FE)

  1. B163653
    Engage the 5 claws to install the outer mirror cover.


4. INSTALL OUTER REAR VIEW MIRROR GLASS (for 2GR-FE)
  1. Place a new outer rear view mirror glass over the motor plate. Ensure that the spring wire is positioned correctly in the guide track on the motor plate.

  1. Cover the mirror glass with a piece of cloth and apply even pressure to engage the glass with the motor plate.

  1. Adjust the mirror manually to check that the spring wire is correctly positioned. There should be a clicking sound during manual adjustment.

  1. Check that the mirror can be adjusted using the outer mirror switch.

  1. Adjust the mirror to the desired position.


5. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP

  1. B136876
    Engage the 4 claws and install the front door inner glass weatherstrip.


6. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
  1. Connect each connector.

  1. B136402
    Engage the front door trim board with the 4 clips of the front door inner glass weatherstrip.

  1. B132840E01
    Engage the 9 clips and install the front door trim board to the front door panel.

  1. Install the 3 screws and clip (A).


7. INSTALL COURTESY LIGHT ASSEMBLY (w/ Courtesy Light)
  1. Connect the connector.

  1. B132839
    Engage the claw and install the courtesy light assembly.


8. INSTALL ASSIST GRIP COVER

  1. B132837
    Engage the 6 claws and install the assist grip cover.


9. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

  1. B132835
    Engage the 3 claws and install the front door inside handle bezel plug.


10. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH

  1. B132833
    Engage the 2 clips and install the front door lower frame bracket garnish.

← INSTALLATION (Jun 2006 – Sep 2006)INSTALLATION (from Jun 2009) →