Place a new outer rear view mirror glass over the motor plate. Ensure that the spring wire is positioned correctly in the guide track on the motor plate.
Cover the mirror glass with a piece of cloth and apply even pressure to engage the glass with the motor plate.
Adjust the mirror manually to check that the spring wire is correctly positioned. There should be a clicking sound during manual adjustment.
Check that the mirror can be adjusted using the outer mirror switch.
Adjust the mirror to the desired position.
5.
INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP
Engage the 4 claws and install the front door inner glass weatherstrip.
6.
INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
Connect each connector.
Engage the front door trim board with the 4 clips of the front door inner glass weatherstrip.
Engage the 9 clips and install the front door trim board to the front door panel.