Slowly fill the radiator with TOYOTA Super Long Life Coolant (SLLC).
Specified capacity:
9.0 liters (9.5 US qts, 7.9 lmp. qts)
HINT:
TOYOTA vehicles are filled with TOYOTA SLLC at the factory. In order to avoid damage to the engine cooling system and other technical problems, only use TOYOTA SLLC or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, non-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology consists of a combination of low phosphates and organic acids).
Contact your TOYOTA dealer for further details.
Slowly pour coolant into the radiator reservoir tank until it reaches the FULL line.
Press the inlet and outlet radiator hoses several times by hand, and then check the level of the coolant. If the coolant level is low, add coolant.
Install the radiator cap sub-assembly and reservoir tank cap.
Start the engine, and warm it up.
HINT:
Adjust the air conditioner set temperature to MAX (HOT).
Stop the engine, and wait until the engine coolant cools down.
Add engine coolant to the FULL line on the radiator reservoir.
8.
INSPECT FOR OIL LEAK
Start the engine. Check for engine oil leaks from the connected parts of the oil filter cap and oil filter drain plug.
9.
CHECK ENGINE OIL LEVEL
Warm up the engine, stop it and wait 5 minutes. The oil level should be between the dipstick's low level mark and full level mark. If the engine oil level is low, check for leakage and add oil up to the full level mark.