REMOVAL
Removal / installation · Vehicles built from Oct 2006
- HINT:
- When removing the name plate, heat the vehicle body and name plate using a heat light.
- Heating temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Name Plate
20 to 30°C (68 to 86°F)
- NOTICE:
- Do not heat the vehicle body and name plate excessively.
| 1. REMOVE LUGGAGE COMPARTMENT DOOR EMBLEM |
Put protective tape around the emblem.

Insert a piano wire between the vehicle body and emblem.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the emblem to the vehicle body.
- NOTICE:
- If reusing the emblem, take care not to damage the emblem or cut the location pins.
- Be careful not to damage the vehicle body.
- If reusing the emblem, take care not to damage the emblem or cut the location pins.
Remove the emblem.
| 2. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE |
Put protective tape around the name plate.

Insert a piano wire between the vehicle body and name plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the name plate to the vehicle body.
- NOTICE:
- If reusing the name plate, take care not to damage the name plate.
- Be careful not to damage the vehicle body.
- If reusing the name plate, take care not to damage the name plate.
Remove the name plate.
| 3. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR PLATE |
Put protective tape around the plate.

Insert a piano wire between the vehicle body and plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the plate to the vehicle body.
- NOTICE:
- If reusing the plate, take care not to damage the plate.
- Be careful not to damage the vehicle body.
- If reusing the plate, take care not to damage the plate.
Remove the plate.
| 4. REMOVE FRONT FENDER PLATE LH |
Put protective tape around the plate.

Insert a piano wire between the vehicle body and plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the plate to the vehicle body.
- NOTICE:
- If reusing the plate, take care not to damage the plate.
- Be careful not to damage the vehicle body.
- If reusing the plate, take care not to damage the plate.
Remove the plate.
| 5. REMOVE FRONT FENDER PLATE RH |
Put protective tape around the plate.

Insert a piano wire between the vehicle body and plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the plate to the vehicle body.
- NOTICE:
- If reusing the plate, take care not to damage the plate.
- Be careful not to damage the vehicle body.
- If reusing the plate, take care not to damage the plate.
Remove the plate.
| 6. REMOVE FRONT DOOR NAME PLATE |
Put protective tape around the plate.

Insert a piano wire between the vehicle body and plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the plate to the vehicle body.
- NOTICE:
- If reusing the plate, take care not to damage the plate.
- Be careful not to damage the vehicle body.
- If reusing the plate, take care not to damage the plate.
Remove the plate.
