2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY

  1. B152782E01
    Apply protective tape to the areas shown in the illustration.

  1. B152783
    Using a moulding remover, disengage the 3 clips.

  1. B152784
    Using a moulding remover, disengage the 4 clips.

  1. Disconnect the connector and remove the instrument panel No. 2 register assembly.


2. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY

  1. E128236
    Disengage the 4 claws and remove the hazard warning signal switch assembly.

← REMOVAL (Oct 2006 – May 2009)INSPECTION (from Oct 2006) →