2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built Jun 2006 – May 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009


INSPECT STEERING PAD SWITCH

  1. Disconnect the steering pad switch assembly connector.

    E136207E01

  1. Measure the resistance according to the values in the table below.

    Standard resistance:
    Tester connection
    Condition
    Specified condition
    AU1 - EAU
    No switch is pushed
    Approx. 100 kΩ
    AU1 - EAU
    SEEK+ switch: push
    0 to 2.5 Ω
    AU1 - EAU
    SEEK- switch: push
    Approx. 0.3 kΩ
    AU1 - EAU
    VOL+ switch: push
    Approx. 1 kΩ
    AU1 - EAU
    VOL- switch: push
    Approx. 3.1 kΩ
    AU2 - EAU
    No switch is pushed
    Approx. 100 kΩ
    AU2 - EAU
    MODE switch: push
    0 to 2.5 Ω
    AU2 - EAU
    VOICE switch: push (*1)
    Approx. 3.1 kΩ
    AU2 - EAU
    ON HOOK switch: push (*1)
    Approx. 0.3 kΩ
    AU2 - EAU
    OFF HOOK switch: push (*1)
    Approx. 1 kΩ

    *1: with Navigation System
    If the result is not as specified, replace the steering pad switch.

← REMOVAL (from Jun 2009)INSPECTION (from Jun 2009) →