INSPECTION
Inspection · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
| INSPECT STEERING PAD SWITCH |
Disconnect the steering pad switch assembly connector.


Measure the resistance according to the values in the table below.
- Standard resistance:
Tester connection
Condition
Specified condition
AU1 - EAU
No switch is pushed
95 to 105 kΩ
AU1 - EAU
Seek+ switch: push
Below 2.5 Ω
AU1 - EAU
Seek- switch: push
313.5 to 346.5 Ω
AU1 - EAU
Volume+ switch: push
959.5 to 1060.5 Ω
AU1 - EAU
Volume- switch: push
3049.5 to 3370.5 Ω
AU2 - EAU
No switch is pushed
959.5 to 1060.5 Ω
AU2 - EAU
MODE switch: push
Below 2.5 Ω
AU2 - EAU
Voice switch: push (*11)
3049.5 to 3370.5 Ω
AU2 - EAU
On Hook switch: push (*11)
313.5 to 346.5 Ω
AU2 - EAU
Off Hook switch: push (*11)
959.5 to 1060.5 Ω
Text in Illustration *1
Component without harness connected
(Steering Pad Switch for 3 Spoke Type)
*2
Component without harness connected
(Steering Pad Switch for 4 Spoke Type)
*3
Volume-
*4
Volume+
*5
Seek-
*6
Seek+
*7
MODE
*8
Off Hook*11
*9
On Hook*11
*10
Voice*11
- *11: w/ Microphone
