2006-2011 Camry Aurion · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

HINT:
Click here.


2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

  1. A129631E01
    Using SST, hold the crankshaft.
    SST
    09213-70011   (09213-70020)
    09330-00021  

  1. A132243
    Remove the 8 bolts, front spacer, drive plate and rear spacer.


3. REMOVE ENGINE REAR OIL SEAL

  1. A132244E01
    Using a knife, cut off the oil seal lip.

  1. Using a screwdriver, pry out the oil seal.

    NOTICE:
    Be careful not to damage the crankshaft.

    HINT:
    Tape the screwdriver tip before use.

← COMPONENTS (from Oct 2006)REMOVAL (from Jun 2009) →