REMOVAL
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1.
REMOVE AUTOMATIC TRANSAXLE ASSEMBLY |
 |
- HINT:
-
Click here.
| 2.
REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY |
 |
- Using SST, hold the crankshaft.
- SST
- 09213-70011
(09213-70020)
09330-00021
- Remove the 8 bolts, front spacer, drive plate and rear spacer.
| 3.
REMOVE ENGINE REAR OIL SEAL |
 |
- Using a knife, cut off the oil seal lip.
Using a screwdriver, pry out the oil seal.
- NOTICE:
- Be careful not to damage the crankshaft.
- HINT:
- Tape the screwdriver tip before use.