REMOVAL
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
REMOVE COOL AIR INTAKE DUCT SEAL (for 2GR-FE)
|
 |
- Remove the 7 clips and cool air intake duct seal.
| 2.
REMOVE FRONT BUMPER ASSEMBLY (for 2AZ-FE) |
 |
without Fog Light: (Click here)with Fog Light: (Click here)
| 3.
REMOVE FRONT BUMPER ASSEMBLY (for 2GR-FE) |
 |
without Fog Light: (Click here)with Fog Light: (Click here)with Clearance Sonar System: (Click here)with Headlight Cleaner System: (Click here)
| 4.
DRAIN WASHER FLUID |
 |
- Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.
| 5.
REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
 |
- Disconnect the connector.
Remove the windshield washer motor and pump assembly.
| 6.
REMOVE HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY (w/ Headlight Cleaner System) |
 |
- Disconnect the connector.
Remove the headlight cleaner motor and pump assembly.