REMOVAL
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
REMOVE FRONT BUMPER ASSEMBLY (for 2AZ-FE) |
 |
Remove the front bumper assembly (Click here).
| 2.
REMOVE FRONT BUMPER ASSEMBLY (for 2GR-FE) |
 |
Remove the front bumper assembly (Click here).
| 3.
REMOVE LOW PITCHED HORN ASSEMBLY (for 2AZ-FE)
|
 |
- Disconnect the connector.
Remove the bolt and the low pitched horn assembly.
| 4.
REMOVE LOW PITCHED HORN ASSEMBLY (for 2GR-FE)
|
 |
- Disconnect the connector.
Remove the bolt and the low pitched horn assembly.
| 5.
REMOVE HOOD LOCK ASSEMBLY (for 2AZ-FE RHD)
|
 |
- Disconnect the connector.
Remove the 3 bolts.
- Disconnect the hood lock control cable.
Remove the hood lock assembly.
| 6.
REMOVE HOOD LOCK ASSEMBLY (for 2GR-FE RHD)
|
 |
- Disconnect the connector.
Remove the 3 bolts.
- Disconnect the hood lock control cable.
Remove the hood lock assembly.
| 7.
REMOVE HOOD LOCK TENSION SPRING A (for 2AZ-FE RHD) |
 |
- Remove the tension spring A.
| 8.
REMOVE HOOD LOCK TENSION SPRING A (for 2GR-FE RHD) |
 |
- Remove the tension spring A.
| 9.
REMOVE HOOD LOCK TENSION SPRING B (for 2AZ-FE RHD) |
 |
- Remove the tension spring B.
| 10.
REMOVE HOOD LOCK TENSION SPRING B (for 2GR-FE RHD) |
 |
- Remove the tension spring B.
| 11.
REMOVE ENGINE HOOD COURTESY SWITCH (for 2AZ-FE RHD) |
 |
- Remove the 2 screws and the engine hood courtesy switch.
| 12.
REMOVE ENGINE HOOD COURTESY SWITCH (for 2GR-FE RHD) |
 |
- Remove the 2 screws and the engine hood courtesy switch.