2006-2011 Camry Aurion · Service Manual TRANSMISSION

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION
  1. Apply the parking brake.

  1. Turn the ignition switch on (IG).

  1. Depress the brake pedal and check that the engine starts when the shift lever is set in the N or P position, but does not start in other positions.

  1. Check that the back-up light comes on only when the shift lever is set in the R position, but the light does not operate in other positions. If a failure is found, check the park/neutral position switch for continuity.

← COMPONENTS (from Oct 2006)REMOVAL (Oct 2006 – May 2009) →