2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

  1. B159322
    Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.


2. REMOVE UPPER CONSOLE PANEL FRONT GARNISH

  1. B158924E01
    Apply protective tape to the area shown in the illustration.

  1. B158926
    Using a moulding remover, disengage the 3 claws as shown in the illustration.

  1. B158925
    Using a moulding remover, disengage the 3 claws and remove the upper console panel front garnish as shown in the illustration.

  1. Disconnect each connector.


3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

  1. B158929E01
    Apply protective tape to the area shown in the illustration.

  1. B158930
    Using a moulding remover, disengage the 2 claws as shown in the illustration.

  1. B158927E01
    Apply protective tape to the area shown in the illustration.

  1. B158928
    Using a moulding remover, disengage the 2 claws as shown in the illustration.

  1. B158931
    Disengage the 6 claws and remove the upper console panel sub-assembly as shown in the illustration.

  1. Disconnect the connector.


4. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY

  1. B158932E01
    Apply protective tape to the areas shown in the illustration.

  1. B158934
    Using a moulding remover, disengage the 6 claws as shown in the illustration.

  1. B158933
    Using a moulding remover, disengage the 5 claws as shown in the illustration.

  1. Disconnect each connector and remove the instrument panel No. 2 register assembly.


5. REMOVE RADIO RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (for Radio Receiver Type)

  1. E141626
    Remove the 4 bolts.

  1. Pull the radio receiver with heater control panel assembly toward the rear of the vehicle and disengage the 4 clips.

  1. Disconnect each connector and remove the radio receiver with heater control panel assembly.


6. REMOVE RADIO NO. 1 BRACKET (for Radio Receiver Type)

  1. E131402
    Remove the 3 bolts, 2 screws and radio No. 1 bracket.


7. REMOVE RADIO NO. 2 BRACKET (for Radio Receiver Type)

  1. E131403
    Remove the 3 bolts, 2 screws and radio No. 2 bracket.


8. REMOVE RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)

  1. E131404
    Remove the radio receiver assembly as shown in the illustration.


9. REMOVE RADIO AND DISPLAY WITH HEATER CONTROL PANEL ASSEMBLY (for Radio and Display Type)

  1. E195855
    Remove the 4 bolts.

  1. Pull the radio and display with heater control panel assembly toward the rear of the vehicle and disengage the 6 clips.

  1. Disconnect each connector and remove the radio and display with heater control panel assembly.


10. REMOVE RADIO NO. 1 BRACKET (for Radio and Display Type)

  1. E195856
    Remove the 4 bolts, 2 screws, radio receiver panel, and radio No. 1 bracket.


11. REMOVE RADIO NO. 2 BRACKET (for Radio and Display Type)

  1. E195857
    Remove the 4 bolts, 2 screws, radio receiver panel, and radio No. 2 bracket.


12. REMOVE RADIO RECEIVER ASSEMBLY (for Radio and Display Type)
← REMOVAL (Oct 2006 – May 2009)INSTALLATION (Oct 2006 – May 2009) →