2006-2011 Camry Aurion · Service Manual HEATER & AIR CONDITIONING SYSTEM

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 2GR-FE RHD)

  1. B159322
    Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.


2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (except 2GR-FE RHD)
for Automatic Transaxle LHD: (Click here)
for Automatic Transaxle RHD: (Click here)
for Manual Transaxle RHD: (Click here)

3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (except 2GR-FE RHD)

  1. B226064
    Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.


4. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (except 2GR-FE RHD)

  1. B226063
    Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.


5. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (except 2GR-FE RHD)
for Automatic Transaxle LHD: (Click here)
for Automatic Transaxle RHD: (Click here)

6. REMOVE UPPER CONSOLE PANEL (except 2GR-FE RHD)
for Manual Transaxle RHD: (Click here)

7. REMOVE UPPER CONSOLE PANEL FRONT GARNISH (for 2GR-FE RHD)

  1. B158924E01
    Apply protective tape to the area shown in the illustration.

  1. B158926
    Using a moulding remover, disengage the 3 claws as shown in the illustration.

  1. B158925
    Using a moulding remover, disengage the 3 claws and remove the upper console panel front garnish as shown in the illustration.

  1. Disconnect each connector.


8. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (except 2GR-FE RHD)
for Automatic Transaxle LHD: (Click here)
for Automatic Transaxle RHD: (Click here)
for Manual Transaxle RHD: (Click here)

9. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for 2GR-FE RHD)

  1. B158929E01
    Apply protective tape to the area shown in the illustration.

  1. B158930
    Using a moulding remover, disengage the 2 claws as shown in the illustration.

  1. B158927E01
    Apply protective tape to the area shown in the illustration.

  1. B158928
    Using a moulding remover, disengage the 2 claws as shown in the illustration.

  1. B158931
    Disengage the 6 claws and remove the upper console panel sub-assembly as shown in the illustration.

  1. Disconnect the connector.


10. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (except 2GR-FE RHD)

  1. B133997E01
    Remove the 2 screws <F>.

  1. Disengage the 4 claws.

  1. Disconnect each connector and remove the upper console panel sub-assembly.

    HINT:
    Set the shift lever in the D position.


11. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (except 2GR-FE RHD)

  1. B152782E01
    Apply protective tape to the areas shown in the illustration.

  1. B152783
    Using a moulding remover, disengage the 3 clips.

  1. B152784
    Using a moulding remover, disengage the 4 clips.

  1. Disconnect the connector and remove the instrument panel No. 2 register assembly.


12. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (for 2GR-FE RHD)

  1. B158932E01
    Apply protective tape to the areas shown in the illustration.

  1. B158934
    Using a moulding remover, disengage the 6 claws as shown in the illustration.

  1. B158933
    Using a moulding remover, disengage the 5 claws as shown in the illustration.

  1. Disconnect each connector and remove the instrument panel No. 2 register assembly.


13. REMOVE RADIO RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (for Radio Receiver Type)

  1. E141626
    Remove the 4 bolts.

  1. Pull the radio receiver with heater control panel assembly toward the rear of the vehicle and disengage the 4 clips.

  1. Disconnect each connector and remove the radio receiver with heater control panel assembly.


14. REMOVE RADIO AND DISPLAY WITH HEATER CONTROL PANEL ASSEMBLY (for Radio and Display Type)

  1. E195855
    Remove the 4 bolts.

  1. Pull the radio and display with heater control panel assembly toward the rear of the vehicle and disengage the 6 clips.

  1. Disconnect each connector and remove the radio and display with heater control panel assembly.


15. REMOVE NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (w/ Navigation System)

  1. E137564
    Remove the 4 bolts.

  1. Pull the navigation receiver with heater control panel assembly toward the rear of the vehicle and disengage the 4 clips.

  1. Disconnect each connector and remove the navigation receiver with heater control panel assembly.


16. REMOVE RADIO NO. 1 BRACKET (for Radio Receiver Type)

  1. E131402
    Remove the 3 bolts, 2 screws and radio No. 1 bracket.


17. REMOVE RADIO NO. 1 BRACKET (for Radio and Display Type)

  1. E195856
    Remove the 4 bolts, 2 screws, radio receiver panel, and radio No. 1 bracket.


18. REMOVE RADIO NO. 1 BRACKET (w/ Navigation System)

  1. E129206
    Remove the 3 bolts, 2 screws and radio No. 1 bracket.


19. REMOVE RADIO NO. 2 BRACKET (for Radio Receiver Type)

  1. E131403
    Remove the 3 bolts, 2 screws and radio No. 2 bracket.


20. REMOVE RADIO NO. 2 BRACKET (for Radio and Display Type)

  1. E195857
    Remove the 4 bolts, 2 screws, radio receiver panel, and radio No. 2 bracket.


21. REMOVE RADIO NO. 2 BRACKET (w/ Navigation System)

  1. E129207
    Remove the 3 bolts, 2 screws and radio No. 2 bracket.


22. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Radio Receiver Type)

  1. E130002
    Remove the air conditioning control assembly as shown in the illustration.


23. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Radio and Display Type)

  1. E196517
    Remove the air conditioning control assembly as shown in the illustration.


24. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (w/ Navigation System)

  1. E129984
    Remove the air conditioning control assembly as shown in the illustration.

← REMOVAL (Oct 2006 – May 2009)DISASSEMBLY (from Jun 2006) →