DISASSEMBLY
Removal / installation · Vehicles built from Jun 2006
| 1. REMOVE AIR CONDITIONING PANEL SUB-ASSEMBLY |
Remove the 5 screws.

Disengage the 4 claws and remove the air conditioning panel sub-assembly.
Disengage the 4 claws and remove the ornament.

| 2. REMOVE CONTROL KNOB SUB-ASSEMBLY |
- NOTICE:
- When disassembling the air conditioning control assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.
Disengage the 4 claws and remove the control panel case.

Remove the 5 screws and switch control sub-assembly.

Driver Side:
Disengage the 3 claws and pull the control knob sub-assembly to the position shown in the illustration.


Disengage the 3 claws and remove the control knob sub-assembly.

- HINT:
- Remove the control knob sub-assembly and the dual push switch as a unit.
Passenger Side:
Disengage the 3 claws and remove the control knob sub-assembly.

