2006-2011 Camry Aurion · Service Manual HEATER & AIR CONDITIONING SYSTEM

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle LHD)

  1. B226062
    Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.


2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle RHD)

  1. B232854
    Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.


3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

  1. B232855
    Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.


4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 2GR-FE RHD)

  1. B159322
    Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.


5. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (except 2GR-FE RHD)

  1. B226064
    Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.


6. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (except 2GR-FE RHD)

  1. B226063
    Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.


7. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle LHD)

  1. B226065
    Disengage the 6 claws and the 3 clips, and then remove the position indicator housing assembly.


8. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle RHD)

  1. B232856E01
    Open the lid of the upper console panel.

  1. Apply protective tape to the area shown in the illustration.

  1. B232857
    Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the position indicator housing assembly as shown in the illustration.


9. REMOVE UPPER CONSOLE PANEL (for Manual Transaxle)

  1. B137274E01
    Open the lid of the upper console panel.

  1. Apply protective tape to the area shown in the illustration.

  1. B137275
    Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the upper console panel as shown in the illustration.


10. REMOVE UPPER CONSOLE PANEL FRONT GARNISH (for 2GR-FE RHD)

  1. B158924E01
    Apply protective tape to the area shown in the illustration.

  1. B158926
    Using a moulding remover, disengage the 3 claws as shown in the illustration.

  1. B158925
    Using a moulding remover, disengage the 3 claws and remove the upper console panel front garnish as shown in the illustration.

  1. Disconnect each connector.


11. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle LHD)

  1. B226097
    Disengage the 3 claws and the 5 clips.

  1. Disconnect the connector and remove the upper console rear panel sub-assembly.


12. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle RHD)

  1. B137277
    Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.


13. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)

  1. B137277
    Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.


14. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for 2GR-FE RHD)

  1. B158929E01
    Apply protective tape to the area shown in the illustration.

  1. B158930
    Using a moulding remover, disengage the 2 claws as shown in the illustration.

  1. B158927E01
    Apply protective tape to the area shown in the illustration.

  1. B158928
    Using a moulding remover, disengage the 2 claws as shown in the illustration.

  1. B158931
    Disengage the 6 claws and remove the upper console panel sub-assembly as shown in the illustration.

  1. Disconnect the connector.


15. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (except 2GR-FE RHD)

  1. B133997E01
    Remove the 2 screws <F>.

  1. Disengage the 4 claws.

  1. Disconnect each connector and remove the upper console panel sub-assembly.

    HINT:
    Set the shift lever in the D position.


16. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (except 2GR-FE RHD)

  1. B152782E01
    Apply protective tape to the areas shown in the illustration.

  1. B152783
    Using a moulding remover, disengage the 3 clips.

  1. B152784
    Using a moulding remover, disengage the 4 clips.

  1. Disconnect the connector and remove the instrument panel No. 2 register assembly.


17. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (for 2GR-FE RHD)

  1. B158932E01
    Apply protective tape to the areas shown in the illustration.

  1. B158934
    Using a moulding remover, disengage the 6 claws as shown in the illustration.

  1. B158933
    Using a moulding remover, disengage the 5 claws as shown in the illustration.

  1. Disconnect each connector and remove the instrument panel No. 2 register assembly.


18. REMOVE RADIO RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (for Radio Receiver Type)

  1. E129175
    Remove the 4 bolts.

  1. Pull the radio receiver with heater control panel assembly toward the rear of the vehicle and disengage the 4 clips.

  1. Disconnect each connector and remove the radio receiver with heater control panel assembly.


19. REMOVE RADIO AND CASSETTE TAPE WITH HEATER CONTROL PANEL ASSEMBLY (w/o CD Player)

  1. E135568
    Remove the 4 bolts.

  1. Pull the radio and cassette tape with heater control panel assembly toward the rear of the vehicle and disengage the 6 clips.

  1. Disconnect each connector and remove the radio and cassette tape with heater control panel assembly.


20. REMOVE RADIO NO. 1 BRACKET (for Radio Receiver Type)

  1. E129176
    Remove the 3 bolts, 2 screws, and radio No. 1 bracket.


21. REMOVE RADIO NO. 1 BRACKET (w/o CD Player)

  1. E135569
    Remove the 2 bolts, 3 screws, radio receiver panel, and radio No. 1 bracket.


22. REMOVE RADIO NO. 2 BRACKET (for Radio Receiver Type)

  1. E129177
    Remove the 3 bolts, 2 screws, and radio No. 2 bracket.


23. REMOVE RADIO NO. 2 BRACKET (w/o CD Player)

  1. E135570
    Remove the 2 bolts, 3 screws, radio receiver panel, and radio No. 2 bracket.


24. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Radio Receiver Type)

  1. E128541
    Remove the air conditioning control assembly as shown in the illustration.


25. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (w/o CD Player)

  1. E135685
    Remove the air conditioning control assembly as shown in the illustration.

← REMOVAL (Oct 2006 – May 2009)INSTALLATION (Jun 2006 – Sep 2006) →