2006-2011 Camry Aurion · Service Manual TRANSMISSION

REASSEMBLY

Removal / installation · Vehicles built from Oct 2006


1. INSTALL SHIFT SOLENOID VALVE SL4

  1. C138527E01
    Coat the shift solenoid valve SL4 and bolt with ATF.

  1. Install the shift solenoid valve SL4 and lock plate to the valve body assembly with the bolt.

    Torque:
    11 N*m{ 112 kgf*cm , 8 ft.*lbf }


2. INSTALL SHIFT SOLENOID VALVE SL3

  1. C138526E01
    Coat the shift solenoid valve SL3 and bolt with ATF.

  1. Install the shift solenoid valve SL3 and lock plate to the valve body assembly with the bolt.

    Torque:
    11 N*m{ 112 kgf*cm , 8 ft.*lbf }


3. INSTALL SHIFT SOLENOID VALVE SL1

  1. C138525E02
    Coat the shift solenoid valve SL1 with ATF.

  1. Install the shift solenoid valve SL1 to the valve body assembly.


4. INSTALL SHIFT SOLENOID VALVE SL2
  1. Coat the shift solenoid valve SL2 and bolt with ATF.

  1. Install the shift solenoid valve SL2 and lock plate to the valve body assembly with the bolt.

    Torque:
    11 N*m{ 112 kgf*cm , 8 ft.*lbf }


5. INSTALL SHIFT SOLENOID VALVE SLU

  1. C138524E01
    Coat the shift solenoid valve SLU with ATF.

  1. Install the shift solenoid valve SLU to the valve body assembly.


6. INSTALL SHIFT SOLENOID VALVE SLT
  1. Coat the shift solenoid valve SLT with ATF.

  1. Install the shift solenoid valve SLT and lock plate to the valve body assembly.


7. INSTALL SHIFT SOLENOID VALVE SL

  1. C138523E01
    Coat the shift solenoid valve SL with ATF.

  1. Install the shift solenoid valve SL to the valve body assembly.


8. INSTALL ATF TEMPERATURE SENSOR ASSEMBLY

  1. C138520E01
    Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.

  1. C138522
    Coat the 4 bolts with ATF.

  1. Install the ATF temperature sensor assembly and clamp to the valve body assembly with the 4 bolts.

    Torque:
    11 N*m{ 112 kgf*cm , 8 ft.*lbf }


9. INSTALL TRANSMISSION WIRE

  1. C138519
    Connect the 8 connectors to the valve body assembly.

  1. C142570E01
    Coat the O-ring with ATF.

  1. C138518
    Coat the bolt with ATF.

  1. Install the transmission wire and lock plate to the valve body assembly with the bolt.

    Torque:
    11 N*m{ 112 kgf*cm , 8 ft.*lbf }

← INSPECTION (from Oct 2006)INSTALLATION (Oct 2006 – May 2009) →