2006-2011 Camry Aurion · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

  1. B136405
    Connect the connector.

  1. Install the power window regulator master switch assembly with the 3 screws.


2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP

  1. B136876
    Engage the 4 claws and install the front door inner glass weatherstrip.


3. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY

  1. B136409
    Connect the front door lock remote control cable and front door inside locking cable to the front door inside handle sub-assembly.

  1. B136403
    Engage the 2 claws and install the front door inside handle sub-assembly.


4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
  1. Connect each connector.

  1. B136402
    Engage the front door trim board with the 4 clips of the front door inner glass weatherstrip.

  1. B132840E01
    Engage the 9 clips and install the front door trim board to the front door panel.

  1. Install the 3 screws and clip (A).


5. INSTALL ASSIST GRIP COVER

  1. B132837
    Engage the 6 claws and install the assist grip cover.


6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

  1. B132835
    Engage the 3 claws and install the front door inside handle bezel plug.


7. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH

  1. B132833
    Engage the 2 clips and install the front door lower frame bracket garnish.


8. INITIALIZE POWER WINDOW CONTROL SYSTEM
(Click here)
← INSPECTION (from Jun 2006)INSTALLATION (Oct 2006 – May 2009) →