2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

REASSEMBLY

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. INSTALL REAR LIGHT GASKET

  1. E192222
    Install a new rear light gasket.


2. INSTALL REAR LIGHT SOCKET AND WIRE

  1. E192221
    Connect the connector and install the rear light socket and wire.


3. INSTALL REAR FOG LIGHT BULB
  1. Install the back up light bulb to the rear light socket and wire.

  1. E192220
    Turn the back up light bulb and the rear light socket and wire in the direction indicated by the arrow shown in the illustration and install them as a unit.


4. INSTALL BACK UP LIGHT BULB
  1. Install the back up light bulb to the rear light socket and wire.

  1. E192218
    Turn the back up light bulb and rear light socket and wire in the direction indicated by the arrow shown in the illustration and install them as a unit.


5. INSTALL REAR COMBINATION LIGHT GASKET

  1. E192214
    Install a new rear combination light gasket.


6. INSTALL REAR TURN SIGNAL LIGHT BULB

  1. E192213
    Install the rear turn signal light bulb to the rear turn signal light socket.

  1. Turn the rear turn signal light bulb and rear turn signal light socket in the direction indicated by the arrow shown in the illustration and install them as a unit.


7. INSTALL REAR BUMPER UPPER SIDE RETAINER

  1. E192215
    Engage the claw and install the rear bumper upper side retainer.

← REASSEMBLY (Oct 2006 – May 2009)INSTALLATION (Oct 2006 – May 2009) →