REASSEMBLY
Removal / installation · Vehicles built from Jun 2006
| 1. INSTALL CONTROL KNOB SUB-ASSEMBLY |
- NOTICE:
- When reassembling the air conditioning control assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.
Driver Side:
Engage the dual push switch with dial on the switch control sub-assembly.
Engage the 3 claws.

Engage the 3 claws and install the control knob sub-assembly.

Passenger Side:
Engage the 3 claws and install the control knob sub-assembly.

Install the switch control sub-assembly with the 5 screws.

Engage the 4 claws and install the control panel case.

| 2. INSTALL AIR CONDITIONING PANEL SUB-ASSEMBLY |
Engage the 4 claws and install the ornament.

Engage the 4 claws.

Install the air conditioning panel sub-assembly with the 5 screws.
