REASSEMBLY
Removal / installation · Vehicles built from Oct 2006
| 1. INSTALL MAYDAY ECU BACK-UP BATTERY |
Connect the back-up battery connector to the mayday ECU.
Install the back-up battery.

Install the back-up battery cover.
Install the 4 screws.

- Torque:
- 1.0 to 3.0 N*m{ 10 to 31 kgf*cm , 9 to 27 in.*lbf }
| 2. INSTALL MAYDAY ECU |
Slide the ECU into the retaining bracket.

Install the retaining screw.
- Torque:
- 1.0 to 3.0 N*m{ 10 to 31 kgf*cm , 9 to 27 in.*lbf }
Connect the mayday ECU connectors to the mayday ECU.
| 3. INSTALL MAYDAY ECU BRACKET |
Install the mayday ECU bracket.
Install the 4 nuts.
- Torque:
- 7.2 N*m{ 73 kgf*cm , 64 in.*lbf }
