DISASSEMBLY
Removal / installation · Vehicles built from Oct 2006
| 1. REMOVE MAYDAY ECU BRACKET |
Remove the 4 nuts.
Remove the mayday ECU bracket.
| 2. REMOVE MAYDAY ECU |
Disconnect the mayday ECU connectors from the mayday ECU.
Remove the retaining screw.
Lift the front end of the ECU and slide the ECU out of the retaining bracket.

| 3. REMOVE MAYDAY ECU BACK-UP BATTERY |
Remove the 4 screws.

Remove the back-up battery cover.
Remove the back-up battery.

Disconnect the back-up battery connector from the mayday ECU.
