High Mounted Stop Light Assembly
Lighting
COMPONENTS

REMOVAL
1. REMOVE LUGGAGE COMPARTMENT DOOR COVER

(a) Using a clip remover, remove the 13 clips and luggage compartment door cover.
-
2. REMOVE REAR NO. 1 SPOILER (
Click Here
)
3. REMOVE CENTRE STOP LIGHT ASSEMBLY

(a) Remove the connector from the high mount stop light wire.
-
(b) Remove the 2 screws and the centre stop light assembly.
-
(c) Withdraw the wire from the spoiler.
HINT:
Tie a string to the connector end of the wire before removal to assist installation.
-

(d) Remove the 2 screws and the 2 spacers.
-
INSTALLATION
1. INSTALL CENTRE STOP LIGHT ASSEMBLY

(a) Install the 2 spacers with the 2 screws.
-

(b) Insert the high mount stop light wire through the spoiler.
HINT:
Tie the wire to the string and pull the wire through the cavity. Remove the string.
-
(c) Fit the connector onto the wire.
-
(d) Install the centre stop light assembly with the 2 screws.
-
2. INSTALL THE NO. 1 REAR SPOILER (
Click Here
)
3. INSTALL LUGGAGE COMPARTMENT DOOR COVER

(a) Install the luggage compartment door cover with the 13 clips.
-