POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows) > All Power Windows do not Operate with Driver Side Door Key Cylinder or Wireless Transmitter |
| 1.CHECK BASIC FUNCTION (WIRELESS AND POWER DOOR LOCK CONTROL SYSTEM) |
Check that the wireless transmitter (Click here for w/ Entry and Start System, Click herefor w/o Entry and Start System) and driver door key cylinder (key linked switch) (Click here) lock and unlock all the doors normally.
| Result | Proceed to |
| Transmitter and driver door key cylinder operate normally | A |
| Transmitter does not operate normally (w/ Entry and Start System) | B |
| Transmitter does not operate normally (w/o Entry and Start System) | C |
| Driver door key cylinder does not operate normally | D |
|
| ||||
|
| ||||
|
| ||||
| A | |
| 2.CHECK MANUAL UP / DOWN FUNCTION |
Check that the manual up/down function using the multiplex network master switch assembly and power window regulator switch assembly can operate all the power windows (Click here).
|
| ||||
| OK | |
| 3.CHECK REMOTE UP / DOWN FUNCTION |
Check that the remote up/down function using the multiplex network master switch assembly operates the power windows (Click here).
|
| ||||
| OK | ||
| ||