TRANSMISSION WIRE > INSTALLATION |
| 1. INSTALL TRANSMISSION WIRE |
![]() |
Coat a new O-ring of the transmission wire connector with ATF WS and install it to the transmission wire.
![]() |
Install the transmission wire with the bolt.
Connect the transmission wire connector.
| 2. CONNECT TRANSMISSION WIRE |
![]() |
Coat the O-ring of the ATF WS temperature sensor with ATF.
Install the ATF temperature sensor with the lock plate and bolt.
Connect the 7 shift solenoid valve connectors.
| 3. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY |
![]() |
Install the 2 magnets in the oil pan.
Apply adhesive or equivalent to new 18 bolts.
![]() |
Using a new gasket, install the oil pan to the transaxle case with the 18 bolts.
| 4. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY |