Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on Driver Door Window Only)

POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on Driver Door Window Only) > DIAGNOSTIC TROUBLE CODE CHART

for Preparation Click here



POWER WINDOW CONTROL SYSTEM 
DTC Code
Detection Item
Trouble Area
See page
B2311
Driver Door Motor Malfunction
1. Battery disconnection when the ignition switch is ON
2. Power window regulator motor (on driver side)
3. Incorrect installation of power window components
4. Overheated power window regulator motor (on driver side)
Click here
B2312
Driver Side Door Master Switch Malfunction
1. Power window regulator motor (on driver side)
2. Power window regulator master switch
3. Wire harness
4. Power window regulator master switch is held same position for more than 20 seconds
Click here
B2313
Glass Position Initialization Incomplete
1. Power window regulator motor (on driver side)
2. Power window regulator motor (on driver side) not initialized
Click here