PLASMACLUSTER > REMOVAL |
| 1. PRECAUTION |
| 2. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD |
| 3. DISCONNECT BATTERY NEGATIVE TERMINAL |
| 4. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY |
Remove the instrument panel safety pad assembly (Click here).
| 5. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT |
![]() |
Remove the screw <F> and the side No. 1 defroster nozzle duct.
| 6. REMOVE NO. 1 HEATER TO REGISTER DUCT |
![]() |
Remove the 3 screws <F> and the No. 1 heater to register duct.
| 7. REMOVE PLASMACLUSTER |
![]() |
Remove the 2 screws and plasmacluster.