ANTI-LOCK BRAKE SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING |
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.CUSTOMER PROBLEM ANALYSIS |
Interview the customer to confirm the trouble.
| |||||
| 3.CHECK CAN COMMUNICATION SYSTEM |
Check for DTCs (Click here).
| Result | Proceed to |
| DTC is not output | A |
| DTC is output | B |
|
| ||||
| |||||
| 4.CHECK DTC AND FREEZE FRAME DATA |
Check for DTCs and Freeze Frame Data (Click here for DTC Check / Clear, Click here for Freeze Frame Data).
Record the DTCs and Freeze Frame Data.
Clear the DTCs.
Recheck for DTCs.
Reproduce the malfunction and check if the DTCs are output again.
| Result | Proceed to |
| DTC is output | A |
| DTC is not output (Problem symptom does not occur) | B |
| DTC is not output (Problem symptom occurs) | C |
|
| ||||
|
| ||||
| |||||
| 5.DIAGNOSTIC TROUBLE CODE CHART |
Go to "DIAGNOSTIC TROUBLE CODE CHART" (Click here).
| |||||
| 6.CIRCUIT INSPECTION |
| |||||
| 7.REPAIR OR REPLACE |
| |||||
| 8.CONFIRMATION TEST |
|
| ||||
|---|---|---|---|---|---|
| 9.SYMPTOM SIMULATION |
| |||||
| 10.PROBLEM SYMPTOMS TABLE |
Go to "PROBLEM SYMPTOMS TABLE" (Click here).
| |||||
| 11.CIRCUIT INSPECTION |
| |||||
| 12.REPAIR OR REPLACE |
| |||||
| 13.CONFIRMATION TEST |
|
| ||||
|---|---|---|---|---|---|