STEERING PAD SWITCH > REMOVAL |
| 1. PRECAUTION (w/ Navigation System) |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE LOWER NO. 3 STEERING WHEEL COVER |
![]() |
Using a screwdriver, disengage the claw and remove the No. 3 lower steering wheel cover.
| 4. REMOVE LOWER NO. 2 STEERING WHEEL COVER |
![]() |
Using a screwdriver, disengage the claw and remove the No. 2 lower steering wheel cover.
| 5. REMOVE STEERING PAD |
![]() |
Using a "TORX" socket (T30), loosen the 2 "TORX" screws until the groove along the screw circumference catches on the screw case.
![]() |
Pull out the steering pad from the steering wheel assembly and support the steering pad with one hand.
Disconnect the horn connector from the steering pad.
Disconnect the 2 airbag connectors and remove the steering pad.
Remove the steering pad.
| 6. REMOVE STEERING PAD SWITCH RH (w/o Radio Receiver) |
![]() |
Disconnect the pad switch connector from the spiral cable.
Remove the screw.
Disengage the 2 pins and remove the steering pad switch RH.
| 7. REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Radio Receiver) |
![]() |
Disconnect the pad switch connector from the spiral cable.
Remove the screw.
Disengage the 2 pins and remove the steering pad switch.
![]() |
Remove the screw.
Disengage the 2 pins and remove the steering pad switch assembly.