Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW MASTER SWITCH

POWER WINDOW MASTER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


    B136405
  1. Connect the connector.

  1. Install the power window regulator master switch assembly with the 3 screws.



2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP


    B136876
  1. Engage the 4 claws and install the front door inner glass weatherstrip.



3. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY


    B136409
  1. Connect the front door lock remote control cable and front door inside locking cable to the front door inside handle sub-assembly.



    B136403
  1. Engage the 2 claws and install the front door inside handle sub-assembly.



4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
  1. Connect each connector.



    B136402
  1. Engage the front door trim board with the 4 clips of the front door inner glass weatherstrip.



    B132840E01
  1. Engage the 9 clips and install the front door trim board to the front door panel.

  1. Install the 3 screws and clip (A).



5. INSTALL COURTESY LIGHT ASSEMBLY
  1. Connect the connector.



    B132839
  1. Engage the claw and install the courtesy light assembly.



6. INSTALL ASSIST GRIP COVER


    B132837
  1. Engage the 6 claws and install the assist grip cover.



7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


    B132835
  1. Engage the 3 claws and install the front door inside handle bezel plug.



8. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH


    B132833
  1. Engage the 2 clips and install the front door lower frame bracket garnish.



9. INITIALIZE POWER WINDOW CONTROL SYSTEM
(Click here)