DTC B1615/14 Front Airbag Sensor LH Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1615/14 |
|
|

| 1.CHECK FRONT AIRBAG SENSOR LH |
![]() |
Turn the ignition switch to the LOCK position.
Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.
Interchange the front airbag sensor RH with LH and connect the connectors to them.
Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.
Turn the ignition switch to the ON position, and wait for at least 60 seconds.
Clear the DTCs stored in the memory (Click here).
Turn the ignition switch to the LOCK position.
Turn the ignition switch to the ON position, and wait for at least 60 seconds.
Check the DTCs (Click here).
| Result | Proceed to |
| DTC B1615/14 is output. | A |
| DTC B1610/13 is output. | B |
| DTC B1610/13 and B1615/14 are not output. | C |
|
| ||||
|
| ||||
| C | ||
| ||