Home › Engine / Hybrid System › 2AR-FE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE
RM19V0EQ _51 Engine / Hybrid System _014573 2AR-FE ENGINE CONTROL _0073912 CAMSHAFT OIL CONTROL VALVE A

2AR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSTALLATION  


PROCEDURE

Hide 11101J 1.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

Camshaft timing oil control valve assembly (for exhaust side)

i.
A195062C19
1.594,0.927 1.417,0.552 1.417,0.552 1.26,0.552 false 1.073,0.448 1.385,0.646 0.313,0.198 10 false *1
*1 New O-ring


Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.


ii.

Install the oil control valve with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with the cylinder head cover).

·

Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.




iii.

Connect the oil control valve connector.



b.

Camshaft timing oil control valve assembly (for intake side)

i.
A195062C19
1.594,0.927 1.417,0.552 1.417,0.552 1.26,0.552 false 1.073,0.448 1.385,0.646 0.313,0.198 10 false *1
*1 New O-ring


Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.


ii.

Install the oil control valve with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).

·

Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.




iii.

Connect the oil control valve connector.



Hide 82121 2.INSTALL ENGINE WIRE

a.

Install the engine wire with the 2 nuts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 3.INSPECT FOR OIL LEAK

Hide 12601B 4.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY