12601B
1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
82121
2.SEPARATE ENGINE WIRE
Remove the 2 nuts and separate the engine wire.
11101J
3.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
Camshaft timing oil control valve assembly (for exhaust side)
Disconnect the oil control valve connector.
Remove the bolt and oil control valve.
| *1 | O-ring |
Remove the O-ring from the oil control valve.
Camshaft timing oil control valve assembly (for intake side)
Disconnect the oil control valve connector.
Remove the bolt and oil control valve.
| *1 | O-ring |
Remove the O-ring from the oil control valve.