Home › Engine / Hybrid System › 2AR-FE ENGINE CONTROL › CAMSHAFT POSITION SENSOR
RM19V0EQ _51 Engine / Hybrid System _014573 2AR-FE ENGINE CONTROL _0073917 CAMSHAFT POSITION SENSOR A

2AR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 11102A 2.REMOVE CAMSHAFT POSITION SENSOR

a.

Camshaft position sensor (for Exhaust Side)

i.
A195076

Disconnect the sensor connector.


ii.

Remove the bolt and camshaft position sensor.



b.

Camshaft position sensor (for Intake Side)

i.
A254799

Disconnect the sensor connector.


ii.

Remove the bolt and camshaft position sensor.