Home › Engine / Hybrid System › 2AR-FE COOLING › THERMOSTAT
RM19V0EQ _51 Engine / Hybrid System _014578 2AR-FE COOLING _0073956 THERMOSTAT A

2AR-FE COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16331A 1.INSTALL THERMOSTAT

a.

Install a new gasket to the thermostat.


b.
A194954C03
2.344,1.521 2.198,1.521 2.198,1.521 1.552,0.906 false 1.583,0.313 2,0.625 0.417,0.313 10 false 10° 2.375,1.427 2.688,1.656 0.313,0.229 10 false *1 1.271,0.313 1.552,0.521 0.281,0.208 10 false 10°
*1 Jiggle Valve


Install the thermostat with the jiggle valve facing upward.

HINT:

The jiggle valve may be set to within 10° on either side of the prescribed position.



Hide 16321 2.INSTALL WATER INLET

a.

Install the water inlet with the 2 nuts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)