Home › Engine / Hybrid System › 2AR-FE LUBRICATION › OIL PRESSURE SWITCH
RM19V0EQ _51 Engine / Hybrid System _014579 2AR-FE LUBRICATION _0073963 OIL PRESSURE SWITCH A

2AR-FE LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83530 1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.
A085603
1.125,0.417 1.365,0.417 false 0.875,0.344 1.146,0.573 0.271,0.229 10 *1
*1 Adhesive


Apply adhesive to 2 or 3 threads of the oil pressure switch.

Adhesive:

TOYOTA Genuine Adhesive 1344, Three Bond 1344 or equivalent.


NOTICE:

Do not let adhesive adhere to the oil hole.



b.

Using a 24 mm deep socket wrench, install the oil pressure switch.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine within 1 hour of installation.



c.

Connect the connector.


Hide 2.INSPECT FOR OIL LEAK