Home › Drivetrain › U760E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT PADDLE SWITCH
RM19V0EQ _52 Drivetrain _014582 U760E AUTOMATIC TRANSMISSION / TRANSAXLE _0073987 SHIFT PADDLE SWITCH A

U760E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT PADDLE SWITCH  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:
·

Do not replace the spiral cable with the battery connected and the ignition switch on.

·

Do not rotate the spiral cable without the steering wheel with the battery connected and the ignition switch on.

·

Ensure that the steering wheel is installed and aligned straight when inspecting the steering sensor.

·

Do not remove the steering sensor from the spiral cable.



PROCEDURE

Hide 1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

Hide 45130 2.REMOVE HORN BUTTON ASSEMBLY

Hide 45100 3.REMOVE STEERING WHEEL ASSEMBLY

Hide 84250A 4.REMOVE STEERING PAD SWITCH ASSEMBLY

Hide 84610F 5.REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)

C238883

a.

Remove the 2 screws.


b.

Disengage the 4 pins and remove the 2 shift paddle switches (transmission shift switch assembly).


Hide 84523 6.REMOVE NO. 1 SWITCH WIRE

a.
C238884

Disengage the 5 guides to remove the shift paddle switch (transmission shift switch assembly) with No. 1 switch wire from the steering wheel assembly.


b.
C224989C10
1.26,1.427 1.26,1.677 false 2.229,1.427 2.229,1.688 false 1.188,1.74 1.458,1.99 0.271,0.25 10 false *1 2.156,1.75 2.469,2.052 0.313,0.302 10 false *1
*1 Clamp


Remove the 2 clamps.


c.

Disconnect the 2 connectors to remove the 2 shift paddle switches (transmission shift switch assembly) from the No. 1 switch wire.